About  Us                 Products                 Cases                 Support                 News                 Feedback                 Contact Us


Tooth Roller Cutters
 
Tooth Cutters
Tooth Roller Cutters
 

Tooth roller cutters are mainly used to drill medium hard and abrasive formations. We manufacture 8" and 12" tooth roller cutters.

  • Cutter teeth are made of steel-carbide alloy, whose hardness reaches HRC 60-64, and welded on the cutter cone piece by piece. The teeth are highly wear resistant and robust, and their lifetime is 3-4 times as hard-faced teeth. Cutter cones are forged with alloy steel and have high strength and rigidity to prevent them from deforming and fracturing.
  • Combined axial-radial roller bearings help improve the cutter operating loads, allowing a thrust force of up to 80kN for 8” tooth cutters and 140kN for 12” tooth cutters.
  • The pressure compensation device will be added to the cutter shaft in cases of high pressure.
  • Maximum drilling efficiency is achieved by optimizing cutter profile and teeth layout.
  • 8" tooth cutters are used to drill the holes from 800mm to 1400mm in diameter, while 12" tooth cutters are used to drill the holes larger than 1400mm in diameter.

You are currently browsing our tooth roller cutters. We also manufacture other RCD roller cutters, rock roller cutters, rock roller bits, TBM disc cutters, raise boring cutters, tricone bits and PDC bits.

-Rock Roller Cutters & Bits


Sitemap    XML    Links    
Copyright©2007-2008    JIANSUI  All  Rights  Reserved